Ascotel IntelliGate 2025/2045/2065
224 Routing elements Part 2
Several Direct Dialling Plans per PBX / PINX
Several direct dialling plans are available. This ensures that the same subscriber
can be reached from the outside via different network accesses and that the cor-
rect CLIP is also transmitted in outgoing traffic.
Fig. 2.34: Several Direct Dialling Plans per PBX / PINX
Tip:
Use a separate direct dialling plan for each individual network access to
the public network (e.g. for different network providers, point-to-point
/ point-to-multipoint connections, different SLGs or different direct dial-
ling ranges).
Direct Dialling Plans in the Private Leased-line Network
Direct dialling plans can also be used in the private leased-line network. This is the
case in particular if incoming calls from the private leased-line network are to be
routed depending on the switching position (see page 357).
Linking a Direct Dial Number with a Call Distribution Element
Direct dial numbers are created as blocks with 1 to several numbers. When the
number range is created each direct dial number is automatically linked with a call
distribution element. A call distribution element can also be subsequently allo-
cated to several numbers.
PBX
Trunk group 1
Trunk group 2
Network A
Network B
Direct dialling plan 1
Direct dialling plan 2
haz0715aaenb0
To Next Page
Loading...
