Ascotel IntelliGate 2025/2045/2065
Part 2 Call Routing 273
Routing without Direct Dialling
A call without a suitable direct dial number is routed to the call destination via the
call distribution element allocated in the trunk group.
[1] One and the same trunk group cannot contain both analogue and digital network interfaces.
Fig. 2.62: Routing a call from the public network without direct dialling
Tab. 2.27: Setting the routing parameters
• Direct dialling plan 1 (number of a direct dialling plan)
• Call Distribution Element 1 (significant only if a suitable direct dial number is not found)
Direct dialling plan 1:
• DD number 20 2 (reference number of a call distribution element)
Call distribution element 2:
• Destinations Switching position 1: SC 220 + KT
• Incoming connections Number of connections allowed simultaneously
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
Parameter Parameter value
Network
connections
Trunk group 1 (DSS1)
-> Call distribution 1
-> Direct dialling plan 1
DD No. -
DD No. 20
-> Call distribution 3
Trunk group 2 (PSS1)
-> Direct dialling plan 2
Direct dialling plan 1
Direct dialling plan 2
Call distribution 1
Call distribution 2
Call distribution 3
1/n
220
PISN
Subscriber
KT line
Switchover
T
T2
a/b
[1]
-> SC 220 + KT
-> SC 220 + KT
-> SC 220 + KT
2/n
220
3/n
220
T
T2
Se
PINX 1
PINX 1
PINX 2
haz0728aaena0
Exchange
222 22 20
To Next Page
Loading...
