Aastra Ascotel IntelliGate 2065 - Page 278

Ascotel IntelliGate 2025/2045/2065
278 Call Routing Part 2
Other characteristics of the Default Call Forwarding function:
• The function is activated only if the called subscriber is free
• Unlike CFNR (*61) the subscriber terminal diverting the call does not carry on
ringing in parallel.
• The Default Call Forwarding is still executed even if no terminal is connected.
• Before the Default Call Forwarding is executed, a check is carried out to see if
the destination is free. If the destination is busy, the call is not forwarded. Each
time the timer expires the delay timer is restarted for a new connection
attempt.
Default Call Forwarding with calls already diverted:
Situation: Subscriber A calls subscriber B, who has redirected to subscriber C. A
default call forwarding to subscriber D is configured at subscriber C.
Function CFNR activated after 0, 3, 5 or 7 rings Depends on the parameter "Priority over activated
CFNR":
• "No": Only CFNR is executed
• "Yes": Default Call Forwarding is always executed. (If
the CNFR call forwarding delay is shorter than the inter-
nal or external delay of the Default Call Forwarding,
CNFR is executed first.)
DECT handset is unobtainable Depends on the parameter "Unobtainable signal"
• "Unobtainable": Default Call Forwarding is executed.
• "Busy" or "Forwarded": Default Call Forwarding is not
executed.
Entry under "CDE if no answer" in the CDE
configuration
Depends on the times configured:
If the CDE call forwarding delay in the CDE configuration
is shorter than or equal to the internal or external delay of
the default call forwarding, CDE call forwarding is acti-
vated; if not, the default call forwarding function is exe-
cuted.
Call transfer without prior notice Depends on the times configured:
The recall is always carried out. If the internal or external
delay of the default call forwarding is shorter than the
recall time, the default call forwarding function is exe-
cuted first.
Routing of the call to the subscriber via UG Default Call Forwarding is not executed
Routing of the call to the line key to a key tele-
phone
Default Call Forwarding is not executed
Function / Configuration / Situation Response