Aastra Ascotel IntelliGate 2065 - Page 296

Ascotel IntelliGate 2025/2045/2065
296 Call Routing Part 2
Call to the public Network via a Key Telephone
Dialling via a line key on a key telephone routes the call via the allocated KT route
The KT route is entered in the call distribution element of the KT line.
The call charges can be logged (among others) at the KT cost centre. The KT cost
centre is entered in the call distribution element of the KT line (for more informa-
tion on call charge allocation see page 361).
[1] One and the same trunk group cannot contain both analogue and digital network interfaces.
Fig. 2.71: Routing a call to the public network via a line key of a key telephone
Tab. 2.37: Setting the routing parameters
Parameter Parameter value
Call distribution element 1:
• KT route 1 (route reference number)
Route 1:
• Trunk groups 1 (reference number of one or more trunk group(s))
• Outgoing connections Number of connections allowed simultaneously
• Digit barring Yes (poll digit barring)
• Numbering plan identifier NPI E.164
Trunk group 2 (PSS1)
<- Trunk group 1
Route 1
Route 2
Subscriber config.
Call distribution 1
220
PISN
1/n
Subscriber config.
Call distribution 3
220
3/n
Subscriber
Network
connections
KT line
T
T2
Se
Trunk group 1 (DSS1)
<- Network
connections
<- Trunk group 2<- Network
connections
Subscriber 220
<- Route 1
<- KT route 1
<- KT route 2
Exchange
T
[1]
T2
333 33 33
333 33 33
a/b
PISN subscriber 330
<- Call number
<- Route 2
PINX 1
PINX 1
PINX 2
haz0732aaena0