Ascotel IntelliGate 2025/2045/2065
352 Call Routing Part 2
Settings at the gateway PINX (PINX 2)
Specifying the transit route
The transit route is specified using the "Transit route" setting. If an incoming call
has a phone number with numbering plan identifier NPI = E.164, it will be for-
warded via the defined route. This route leads to the public network (see also
page 338).
Tab. 2.73: Settings for the break-out routing at the gateway PINX (PINX 2 in Zurich)
Parameter Parameter value
Transit route:
• Route 4 (this route is used for the transit routing)
Route 4:
• Name Zurich, exchange
• Trunk groups 1
• Numbering plan identifier NPI E.164
• Type of number TON Unknown
Trunk group 1:
• Name Zurich, ISDN exchange
• Network interfaces Network interfaces of this trunk group
• Network type Public
• Protocol DSS1
• Automatic CLIP yes
To Next Page
Loading...
