Ascotel IntelliGate 2025/2045/2065
374 Call logging (CL) Part 2
The basic surcharge is added to every chargeable call. If the basic surcharge is to
be applied only as of, say, –.20, the following settings are necessary:
Range 1: surcharge factor 0; start of range 2: –.20.
This means, for example, that a hotel guest will only be charged for a call as of
the second metering pulse.
Call charges on cost centres allocated to network interfaces or call distribution
elements are never adapted via the surcharge calculator.
No surcharge calculators are configured after an initialization.
Application Example
Tab. 2.82: Example: A subscriber incurs 30.- in call charges. He pays 61.50.
Surcharge ranges Network call charges Surcharge Call charge
invoiced
from to Amount Factor Charge per
range
Display
Charge counter
Basic surcharge – – – – 2.– 2.–
Range 1 0 10.– 10.– X 3 = 30.– 32.–
Range 2 10.– 15.– 5.– X 2 = 10.– 42.–
Range 3 15.– 20.– 5.– X 1,5 = 7.50 49.50
Range 4 20.– End value
(here 30.–)
10.– X 1.2 = 12.– 61.50
To Next Page
Loading...
