Ascotel IntelliGate 2025/2045/2065
410 Call logging (CL) Part 2
Serial number llll 00 -| 4 72
Carriage Return CR 1 76
Line Feed LF 1 77
1)
Dialling determines whether Subscriber No. or CC No. is displayed. With exchange access 0 or 10, the
SC No. is displayed; if exchange access with CC No. 13 is used or if charging is switched to the cost centre
during the call using *78, the CC No. is displayed. Subscriber numbers are always output with format
"|- SP"; cost centre numbers, always with format "00 -|".
As a cost centre number this field can be 5 or 9 digits long. Depending on the configured cost centre
length ≤ 5, the field is 5 characters long. As of cost centre length ≥ 6, the length is 9 characters. If the
cost centre length ≥ 6, all the offsets following the cost centre are incremented by 4 characters.
2)
The trunk card number is output in position "bb"; the network interface number in "pp"; and the pri-
mary channel group "0" in "c" (see example on page 411).
3)
With "Data protection ON" the last 4 digits of the number are replaced by "." (full stop) characters.
In Switzerland and other countries this applies to private calls (data protection for business calls never
active); in Germany, business calls (data protection for private calls never active).
Content, meaning Structure Format Length Print
offset
To Next Page
Loading...
