Ascotel IntelliGate 2025/2045/2065
456 Features Part 2
Detailed Description
Tab. 2.153: Substitution
The substitution can only be switched on and off at an operator console and is
then valid for all the operator consoles in the PBX.
Personal calls are not diverted.
Calls that were signalled on the operator console before proxy was switched on
are not diverted.
If the "Subscriber" destination for the substitution is busy, caller A obtains the
busy tone. Call waiting is not automatic.
If "General bell" is configured as the substitution's destination, the call is placed
in the general bell's queue and caller A obtains the ring-back tone.
Prefix Dialling Procedure
Tab. 2.154: Substitution: Procedure
System configuration
Tab. 2.155: Substitution: System configuration
Interface Operating sequence / signalling on the ter-
minal
Scope
B • All the PBX operator consoles indicate the
fact that the proxy is activated.
• When the proxy is activated, calls are still
signalled at the operator console but no
longer acoustically.
Possible interfaces:
• Operator Console
C Possible destinations:
• Subscribers: internal, PISN
• General Bell
• Both (subscriber + general bell)
Requirement:
C is not protected against calls (Do not disturb,
*26) or Call Forwarding Unconditional (*02).
Office 45 as an Operator Console
Switch proxy on and off
Parameter Parameter value Remarks
Substitution <SC No.>.
To Next Page
Loading...
