Ascotel IntelliGate 2025/2045/2065
458 Features Part 2
Detailed Description:
The handset is logged on under System A on its own PBX and under B, C and D
on the other PINX. On each PBX a number is configured under the corresponding
DECT subscriber ("Follow Me Number") which is dialled automatically as soon as
the handset registers with the system. On a PINX this action activates a diversion
from the handset's own PBX to the system onto which the handset has just reg-
istered. If the handset registers back with its own PBX, the previously activated
diversion is deactivated.
Other properties:
• Twin Mode is possible on one's own PBX
• Not possible in virtual networks
• Possible only with Office 135 and Office 155pro
Notes:
If the "Follow Me Number" cannot be dialled when the handset regis-
ters with a system, because the QSIG link is either interrupted or over-
loaded, the handset will be unable to register. It will continue trying until
registration is successful.
With Office 135 and Office 155pro "Long-Click 1" switches over only
temporarily to manual search of the next system. What is relevant is the
setting in the handset's configuration menu. This prevents accidentally
switching the handset over from "automatic" to "manual" system
search and therefore unintentionally deactivating DECT Follow Me.
The following configuration option can be used as an alternative to DECT Follow
me in a network with only 2 systems:
CFU if Unobtainable in a Network with 2 Systems
If the majority of phone calls take place in the same system, the AIMS parameter
"CFU if Unobtainable" can be used to find the handset on the second system:
• The handset has the same internal number in both systems.
• With the first call the diversion takes approx. 13 seconds. The diversion is
immediate as of the second call.
• Twin Mode is possible on one's own PBX
• Also possible in virtual networks
To Next Page
Loading...
