Ascotel IntelliGate 2025/2045/2065
482 Features Part 2
Fig. 2.188: Intrusion
Detailed Description
Tab. 2.194: Intrusion
Note:
If the conference tone is deactivated in the system configuration,
subscriber B will not hear an attention tone. The national terms and con-
ditions for data protection need to be observed in this respect.
If B is making an exchange all, intrusion will only work if this feature is also ena-
bled for exchange calls, throughout the system.
Tip:
If intrusion is disabled, it is possible to send a text message to an
intruded subscriber if he has a system terminal with display, and to do
so even during a call.
Interface Operating sequence / signalling on the terminal Scope
A If B has an analogue connection, A will hear C’s
intrusion.
B Subscriber B who is intruded upon obtains the
intrusion tone to signal that in addition to the
current call he also has an internal call to the
intruding subscriber C
Requirement:
• B has allowed intrusion on his set.
• B is not in the process of setting up a call,
in an enquiry call or in a conference.
C C will obtain the busy tone if intrusion is not
enabled or not available and if B rejects the
intrusion
Possible interfaces:
• Internal
Requirement:
• C is authorized to intrude.
haz0597aaxxa0
C B
A
To Next Page
Loading...
