Ascotel IntelliGate 2025/2045/2065
484 Features Part 2
Fig. 2.189: Announcement
Detailed Description
Tab. 2.198: Announcement
Creating subscriber groups for the announcement:
• Up to 8 (System 2025 / 2045) or 16 (System 2065) announcement groups can
be defined.
• Each group can consist of up to 16 subscribers.
• These subscriber groups are also used for the feature Send Text Messages (see
"Sending and reading text messages", page 493).
Cordless subscribers in the subscriber group can only be a destination for text
messages and not for announcements.
Tip:
This feature can be combined with the transfer of an outside call to a
paged person. If the announcement is answered, the subscriber
searched for is automatically connected with the outside subscriber put
on hold.
Interface Operating sequence / signalling on the terminal Scope
A Requirement:
• A is authorized to make announcements
B When announcement is activated, subscriber B
or all the subscribers in the group will hear a
warning tone over the loudspeaker
Possible interfaces:
Internal only:
• Subscriber
• Group of subscribers
Requirement:
The terminal supports the announcement
(Office 25, Office 35, Office 45, Office 20,
Office 30, Office 40) and B has allowed
announcement to his own set
BA
"HELLO""HELLO"
C
A
haz0226aaena0
To Next Page
Loading...
