Ascotel IntelliGate 2025/2045/2065
Part 2 Features 497
Detailed Description
Tab. 2.217: Leave message
If the conditions for subscriber A are not met (A is not an internal subscriber or
does not have an alphanumerical display):
The call is routed to the number of the configured Call Forwarding Unconditional.
If this number is not configured, the call is routed in the normal way to the sub-
scriber who has left the message. The call is stored in the list of callers.
Message:
• The message is either user definable or can be selected from a choice of 16
standard texts (see "Standard texts", page 498).
• The standard texts can be configured to the customer's special requirements.
• The standard texts can be activated with or without additional parameters.
Their length is limited to 160 characters.
Note:
Activating a call forwarding deletes the message.
Prefix Dialling Procedures
Tab. 2.218: Leaving a message: Procedures
System configuration
Tab. 2.219: Leaving a message: System configuration
Interface Operating sequence / signalling on the terminal Scope
A Possible interfaces:
internal only
Requirement:
The subscribers is equipped with a digital
terminal with alphanumerical display
(except for Office 20).
B The subscriber obtains the acknowledgement
tone every time he activates / deactivates the
feature.
*/# procedure
Activate leave message *24 Text. No. [Param] #
Clear leave message #24
Parameter Parameter value Remarks
Predefined CFU <SC No.>
To Next Page
Loading...
