Ascotel IntelliGate 2025/2045/2065
546 Features Part 2
Security elements:
• Password protection (change the password at regular intervals using AIMS or
the System Assistant of the Office 45).
• External remote control barring throughout the system.
• Subscriber B authorized to use remote control access.
• Reduction in the choice of remote-controlled features using the special digit
barring facilities of the external remote control.
• Time limit when entering the remote-control sequence:
The */# procedures have to be entered within 12 seconds; thereafter the con-
nection is cleared down automatically.
• Access logging:
Remote control attempts from the outside are logged in the incoming call log-
ging (ICL). If the attempt is successful, the DTMF sequence is entered in the
field "Dest. No.1". Unsuccessful attempts are entered with the sort character
xx9 (only in PC5 format; see "Structure of the PC5 output format", page 385).
System configuration
Tab. 2.304: External remote control: System configuration
Reference to Other Features
Parameter Parameter value Remarks
Password 6 digits exactly with digits (0 to 9) Adjustable throughout the system at the
attendant authorization (also with the
System Assistant of the Office 45)
External remote control
(ERC)
Enabled
Internal digit barring Selects the internal digit barring for
switch position 1 to 3 of switch
group 1
Initialization values:
• Digit barring settings:
8/8/8 (2025/2045)
16/16/16 (/2065)
• Digit barring 8/16: *85, *75, #75 barred
Remote control Enabled Subscriber-specific (enable remote control
of the subscriber's terminal)
DDI number <ERC DDI number> Create DDI number for ERC and link with
CDE
CDE destination ERC Can only be entered once a valid pass-
word has been entered
Features:
• "Remote controlling features from within the system", page 543
To Next Page
Loading...
