EasyManua.ls Logo

Aastra Ascotel IntelliGate 2065 - Page 634

Aastra Ascotel IntelliGate 2065
1014 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ascotel IntelliGate 2025/2045/2065
634 Planning DECT systems Part 3
Fig. 3.30: Minimum number of radio units per zone in relation to the number of handsets and
the traffic volume.
If the coverage ranges of radio units overlap, the resources of the neighbouring
radio units in the shared area (zone) are cumulated.
Each radio unit is connected to an Ascotel DECT-compatible AD2 interface via one
or two AD2 lines (prerequisite: at least one DSP card fitted). The maximum
number of radio units per system is specified in Tab. 3.20.
The potential locations are determined on the situation plan and then definitively
agreed on-site through the use of measurements.
10
1
2
4
low (SB-4)
medium (SB-4)
high (SB-4)
Minimum number of radio units
Number of handsets in the system
haz1379aaena0
6
8
10
15
20
20
40
60
80
100
150
Traffic volume
high (SB-8)
medium (SB-8)
low (SB-8)

Table of Contents

Other manuals for Aastra Ascotel IntelliGate 2065

Related product manuals