Ascotel IntelliGate 2025/2045/2065
940 Operations supervision Part 7
Tab. 7.18: The displayed data and what it means
System failures menu item
Tab. 7.19: System failures display
The system's last 80 system failures (resets) are displayed. The resets are incre-
mented in the counter in the top right (0...255).
Significance of the display: Error type W = restart (watchdog), date, time
When printing, only the last 4 addresses are printed out.
Power failures menu item
Tab. 7.20: Power failures display
Only the restart time is recorded.
Display Description
Normal
value / idle
state
Note
BCS: xxxxx Number of existing BCS references BCS: 00000 Each active connection needs 2
BCS references
CC: xxxxx Number of existing call controls CC: 00000 For each BCS reference there is
one or more CC
SUBS: xxxx Number of subscribers in the system SUBS: 0000 0000: No ports busy
NSUB: xxxx Number of PISN subscribers in the sys-
tem
NSUB: 0000 0000: No PISN SC in the system
LINE: xxxx Number of lines in the system LINE: 0000 0000: No lines defined
DIST: xxxx Number of call distributions in the sys-
tem
DIST: 0000 0000: No call distribution
defined
DDIN: xxxx Number of DDI numbers in the system DDIN: 0000 0000: No DDI numbers defined
ABB: xxxx Number of abbreviated dialling num-
bers in the system
ABB: 1000 1000: Initialization value
unchanged
== SYSTEM FAILURES 52
W 15.09.00 13:32 011A59F2, 011A5A8C, 01156FFE
W 06.12.00 13:32 011A59F7 011A5A82 01156FF1
== POWER FAILURES
01.12.98 16:13
To Next Page
Loading...
