Abbott i-STAT Alinity - Page 54

Administrave Opons: Operator Management
Enable/Disable Training Mode Enabling allows for operator to enter
instrument training mode. Tesng pathway
screens in training mode are the same as those
found in normal operaon except for the
purple frame around each screen. Although
customizaon is not required for training
mode use, there are many addional funcons
that can be added through customizaon.
View Observaon Checklist This funcon requires creang a customizaon
prole that includes a facility specic list of
observable skills. Trainer may use the list to
observe a trainee complete listed skills
Operator Event Log Reserved for future use.
Administrave Opons: Prole Management
Install Prole from USB Follow prompts on the screen to
install instrument soware.
If the instrument does not detect
the Base Staon, try the
following:
• remove the instrument and
re-seat it on the Base Staon
• check to ensure that the Base
Staon is geng power (blue
light illuminated)
If the instrument does not detect
the USB drive, try the following:
• remove the USB and reinsert
• make sure the USB is
formaed.
Install Prole from Server
Reserved for future use.
Delete Prole Follow prompts on screen to
delete the customizaon prole
installed on instrument.
Prole Status List of informaon regarding
customizaon prole loaded on
instrument.
16
i-STAT Alinity — System Operaons Manual Art: 745527-01 Rev. N Rev. Date: 13-Oct-2022