Version 16.10 AF-6600 AF-5000 Series Install Manual 146
Diemech Turbine
The Diemech Turbine uses both CAN Aerospace and individual sensors to monitor the engine. The following sensors
should be connected to the engine:
Gearbox Oil Pressure
AF-5000 EMS Connector Sensor Pin
Customer Power (9-36V) 1
Aircraft Ground 2
DB-37 Pin 6 Oil Pressure 3
Oil Temperature
AF-5000 EMS Connector Sensor Pin
DB-37 Pin 7 Oil Temp 1
DB-37 Pin 5 Ground 5
Fuel Pressure
Uses standard AFS Kavlico (0-50PSI) sensor and wiring
EGT
QTY 1 Type K EGT probe wired to EGT #1 EMS input.
To Next Page
Loading...