Version 16.10 AF-6600 AF-5000 Series Install Manual 33
Electrical Connections
For wiring information see APPENDIX M:
EFIS Main Power Connections
The AF-6600 / AF-5000 Series power requirement is 12 volts at 3 Amps, a 5 amp circuit breaker or fuse
should be used for the system.
All wire should meet Mil Standard MIL-W-22759/16 (Tefzel insulation)
20 AWG wire is normally sufficient for the power supply and ground wires.
EFIS Main Cable (DB-25)
Pin 1, 15 Red Master Power
Pin 2, 3 Black Master Ground
The master power pins are internally connected.
To Next Page
Loading...