Version 16.10 AF-6600 AF-5000 Series Install Manual 181
Air Data System
Altitude
The Altimeter configuration menu will display the altitude data from each of the connected ADAHRS units.
2. Display Units
Lets you select the units for the
Altimeter tape.
ADAHRS 1 DATA
5. Pressure Alt (FT) ADAHRS 1
Current Altitude reading
6. Altitude Adjust (FT) ADAHRS 1
ADAHRS 2 DATA
9. Pressure Alt (FT) ADAHRS 2
Current Altitude reading
10. Altitude Adjust (FT) ADAHRS 2
The altimeter check should be performed on an as-needed basis. If one of the ADHARS altimeters is found
to be out of specification you can adjust using the Altitude Adjust value to correct for any errors. After making
an adjustment, ensure that the altimeter meets the tolerances allowed between 0 and 30,000 feet. If this
adjustment does not correct the unit, contact Advanced Flight Systems for service.
See Appendix P for instructions on performing a Pitot/Static test on the system.
To Next Page
Loading...