Agilent Technologies 4288A User Manual

240 Appendix B
Information for Replacing 4278A with 4288A
At-a-Glance List of GPIB Command Correspondence
SHM? Reads out the measured SHORT compensation value (data for SHORT
compensation).
:CORR:DATA on page 158
SHOR{0|1} Turns ON/OFF the SHORT compensation. :CORR:SHOR on page 165
SLIM= Sets the limit range of the secondary parameter. :CALC:COMP:SEC:LIM on page 145
SPAR{1|2} Sets the definition parameter of the standard for standard (LOAD)
compensation.
:CORR:CKIT:STAN3:FORM on page 156
STD{0|1} Turns ON/OFF standard (LOAD) compensation. :CORR:LOAD on page 160
STM? Reads out the measured standard compensation value (data for LOAD
compensation).
:CORR:DATA on page 158
STOR Stores (saves) the measurement condition. *SAV on page 127
STR? Reads out the standard compensation reference value (setup value of the
standard for LOAD compensation).
:CORR:CKIT:STAN3 on page 155
[ T ]
TRIG{1-3} Sets the trigger mode. :TRIG:SOUR on page 196
[ V ]
VMON{0-6} Sets the items to be displayed. N/A
[ X ]
XOP Makes a measurement to obtain the measured OPEN compensation value
(data for OPEN compensation).
:CORR:COLL on page 157
XSH Makes a measurement to obtain the measured SHORT compensation value
(data for SHORT compensation).
XSTD Makes a measurement to obtain the measured standard compensation value
(data for LOAD compensation).
XTMP Executes the temperature compensation. N/A
[ * ]
*CLS Clears the status byte register. *CLS on page 124
*IDN? Reads out the model name and firmware version. *IDN? on page 125
*LRN? Reads out the setup state. N/A
*OPT? Reads out the installed option number. *OPT? on page 126
*RST Resets the instrument. :SYST:PRES on page 193
*SRE Sets a mask (service request enable register) to the status byte register or
reads out it.
*SRE on page 127
*STB? Reads out the contents of the status byte register. *STB? on page 128
*TRG Triggers a measurement. :TRIG on page 195
Table B-25 At-a-glance list of GPIB command correspondence between 4278A and 4288A
(alphabetical order)
4278A Function overview 4288A

Agilent Technologies 4288A Specifications

General

Brand	Agilent Technologies
Model	4288A
Category	Measuring Instruments
Language	English