Agilent Technologies 8890 User Manual

15 Inlets
Operation Manual 229
If your column is defined and you specify a flow or pressure program for your column, the
ramp does not begin until after Sampling end expires.
Pressure Actual and setpoint interface pressure before a run and after sampling time.
Total flow The actual flow to the interface. This is a reported value, not a setpoint.
Septum Purge Flow through the septum purge vent, range 0 to 30 mL/min.

Agilent Technologies 8890 Specifications

General

Brand	Agilent Technologies
Model	8890
Category	Laboratory Equipment
Language	English