Lesson 6 – Executing the DAC Linearity Test
268
As the Datalog file can contain multiple waveforms of the same
type (for example, DAC Distortion FFT, calculated for several
pins), the waveforms are simply numbered in the order as they
appear in the log file.
Datalog Waveform Selection Example
Context Information Once you have chosen a waveform to be displayed, the context
information contained in the Datalog file is automatically filled
into the right-hand part of the Select Waveform window.
The T
ITLE is the name of the testfunction, and the X/Y annotations
(Name and Unit) are taken from the log file.
Labels that could not be determined are left blank.
As you may wish to document (print) the logged data combined
with your own annotations, you can overwrite or complement the
proposals.
Buttons R
ESET ALL SELECTIONS: Returns you to the default (empty) window.
S
AVE/LOAD SETTINGS: The display setting can be saved in a file and
loaded from that file.
D
ONE: Closes the Select Waveform window and displays the chosen
waveforms in the Mixed-Signal Tool.
To Next Page
Loading...
