Lesson 3 – Setting Up the Digital Capturing
337
Defining a Vector Variable
A vector variable is always related to one specific vector label and
cannot be used with another one.
Setup Window for a Vector Variable
1
Enter the name for the vector variable.
2 Check the box Show only DIGCapt pins if you want to see only
capture pins in the pin list. (Other Pins will appear shaded)
3 Highlight the pin(s) you want to retrieve the captured data from,
and copy them to the right-hand box.
4 Select the Transfer Mode parallel or serial.
In parallel mode, for each of the n selected pins one sample
(1bit) will be read, and the final n-bits sample is composed of
the individual pin samples. The sample of the first pin listed in
the vec variable pins field becomes the Most Significant Bit
(MSB) of the n-bit sample, the sample of the last pin listed
becomes the Least Significant Bit (LSB).
To Next Page
Loading...
