Agilent Technologies 93000 SOC Series - Unit 3 DAC Test Setup and Execution; Lesson 1 The Training DAC; Lesson 2 Waveform Digitizer Setup with the Analog Setup Tool

Contents
4
Lesson 2
Addressing the Analog Modules
2-1 Locations of Analog Boards in the Testhead ........................... 131
2-2 Analog Pins of the Board............................................................ 134
2-3 Identification of Analog Channels in the Software ................ 139
Lesson 3
Synchronization of Analog Modules
3-1 Synchronization + Triggering..................................................... 146
3-2 Adjusting the Synchronization Timing ..................................... 151
Unit 3 DAC Test Setup and Execution
Lesson 1
The Training DAC
1-1 DAC Basics.................................................................................... 157
1-2 Characteristics of the Training DAC......................................... 159
1-3 Mixed-Signal Test Setup Procedure .......................................... 161
1-4 Summary and Discussion ........................................................... 164
Lesson 2
Waveform Digitizer Setup with the Analog Setup Tool
2-1 Functions of the Analog Setup Tool.......................................... 167
2-2 Starting the Analog Setup Tool.................................................. 175
2-3 Core Selection and Global Functions........................................ 177
2-4 Setting Up the Analog Hardware............................................... 181
2-5 Setting Up Sequencer Program and Waveform Memory Labels ..
184
2-6 Reviewing and Changing the Waveform Memory ................... 192
2-7 Viewing the Relay Multiplexer Switches .................................. 194
2-8 Summary and Discussion ........................................................... 196