Lesson 3 – Introduction to the Software
49
Digital Capture Setup
Test Execution Setup
Once the setup data is entered, the test execution can be defined.
The central element in the test execution is the test suite. A test
suite typically performs on specific device test.
The test suite is an element of the test flow. It is set up with the
Test Flow Editor.
Typically, a test suite runs a device test, using a particular sub-set
of all the setup data for the device. The test that is run by the test
suite can be realized in three ways:
• as a Testfunction
• as a Test Method
• as a User Procedure
To Next Page
Loading...
