Alcatel-Lucent 7210 SAS M - Page 369

Virtual Private LAN Services
7210 SAS M Services Guide Page 369
Show Commands
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
show
—Show Commands
—service
— egress-label egress-label1 [egress-label2]
— fdb-info
— fdb-mac ieee-address [expiry]
— id service-id
— all
— base [msap] [bfd]
— endpoint [endpoint-name]
— fdb [sap sap-id] [expiry]] | [mac ieee-address [expiry]] | [detail] [expiry]
— igmp-snooping
— all
— base
— mvr
— mrouters [detail]
— port-db sap sap-id [detail]
— port-db sap sap-id group grp-address
— port-db sdp sdp-id:vc-id [detail]
— port-db sdp sdp-id:vc-id group
grp-address
— proxy-db [detail]
— proxy-db [group grp-ip-address]
— querier
— static [sap sap-id]
— statistics[sap sap-id | sdp sdp-ic:vc-id]
— labels
— l2pt disabled
— l2pt [detail]
— mac-move
— mfib [brief ]
— mfib [group grp-address | mstp-configuration]
— sap [sap-id [detail]]
— sdp [sdp-id | far-end ip-addr] [detail]
— split-horizon-group [group-name]
— stp [detail]
— ingress-label start-label
[end-label]
— sap-using [sap sap-id]
— sap-using [ingress | egress] filter filter-id
— sap-using [ingress | egress] qos-policy qos-policy-id
— sap-using [ingress | egress]
— sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
— sdp-using [sdp-id[:vc-id] | far-end ip-address]
— service-using [vpls]