NTP 160 — Install an I-211M-K or I-211M-L indoor ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 160-13
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
14 Connect the power cable to the power connector on the ONT unit.
Figure NTP 160-9: Power cable and power connector alignment for the I-211M-K and
I-211M-L indoor ONTs
Figure NTP 160-10: Pin and pin hole configuration for the I-211M-K and I-211M-L indoor
ONTs
Warning — To avoid the possibility of damage to the pins on the power
cable, carefully align the arrow on the power cable with the notch on
the protective rim around the ONT power connector as shown in
Figure NTP 160-9. If these two objects align, the pins on the cable will
also align with the pin holes in the power connector prior to making the
connection. The pin and pin hole configurations are shown in Figure
NTP 160-10.
20554
20526
To Next Page
Loading...
