Alcatel-Lucent 7360 - Page 398

5 — VoIP overview
5-52 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
message_waiting_m
ode
The mode for presenting a
message-waiting indication to
the user. This is a sequence of up
to three values: “dial-tone” to
enable stutter dial tone, “visual”
to enable visual MWI, and
“reminder-ring” to enable a
reminder ring. Any combination
of the three may be specified.
This is an optional parameter.
The default value is “dial-tone.”
You can specify more than one
value at a time in the XML file.
Separate the values using
spaces.
All lines of I-240W-S ONT should
be configured the same.
YYAll
except
package
C, D,
and E
Yes TL1 using
CALLPRESENT
set to 7 using
ent-profile-v
oipappservic
e
CLI using
mwi-splash-ri
ng,
mwi-spl-dialt
one,
mwi-visual-in
di
using
configure
voice ont
voip-app-serv
ice
vmwi_refresh_interv
al
The duration, in minutes, of the
interval between successive
“refresh” transmissions of the
message-waiting status to the
analog line, if “visual” is
specified in
message_waiting_mode. If the
value of this property is zero,
“refresh” transmissions will not
be performed. This is an optional
parameter. This is a
non-negative integer expressed
in minutes. The default value is
30.
All lines of I-240W-S ONT should
be configured the same.
YYAll
except
package
C, D,
and E
No, value is
derived
from
FTP/default
line profile.
N/A
vmwi_abbreviated_r
ing
Indicates whether the
abbreviated ring option is
enabled. This is a string
containing a value of “yes” or
“no.” This is an optional
parameter. The default value is
“no.”
For other devices the value is no
and cannot be changed.
YYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
mwi_reminder_burst The duration of the
message-waiting reminder ring
burst. This is an optional
parameter. This is an integer
expressed in milliseconds. The
default value is 500.
YYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
mwi_reminder_inter
val
The duration of the interval
between message-waiting
reminder ring bursts. This is an
optional parameter. This is a
non-negative integer expressed
in minutes. The default value is
15.
YYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(10 of 30)