Configuring an Internal DHCP Server Configuration File Parameters and Syntax
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 22-15
11 resource-
location-servers
option
resource-
location-
servers
10.10.0.100;
ip_address_
list
N/A Specifies the IP address of the
Resource Location server available to
the client.
12 host-name
option host-
name "bgp00001
4bgs";
N/A Same as in
Object
Profile
Specifies the name of the client. If
the host name is defined in an option
template, it overrides any definition
in the Object Profile.
13 boot-size
option
boot-size 30;
numeric N/A Specifies the length of the default
boot image of the client. The
maximum file length is 65,535 bytes.
14 merit-dump
option merit-
dump "m_dump";
text N/A Specifies the pathname of the file
where the core image is to be
dumped in the occurrence of a crash.
The path is formatted as a character
string consisting of characters from
the Network Virtual Terminal (NVT)
ASCII character set.
15 domain-name
option domain-
name
"abc.example.
com";
N/A Same as in
Subnet
Profile
Specifies the domain name to resolve
hostnames via the Domain Name
Service (DNS).
16 swap-server
option
swap-server
10.10.0.100;
ip address N/A Specifies the IP address of the client's
swap server.
17 root-path
option
root-path
"/root";
text N/A Specifies the pathname that contains
the client's root directory or partition.
The path is formatted as an NVT
ASCII character string.
18 extensions-path
option
extensions-path
"/ext";
text N/A Specifies a text string to denote a file,
retrievable via Trivial File Transfer
Protocol (TFTP). The file contains
information that can be interpreted in
the same way as the 64-octet vendor-
extension field within the BOOTP
response. The length of the file is
unconstrained. All references to
instances of the BOOTP Extensions
Path field within the file are ignored.
19 ip-forwarding
option ip-
forwarding
false;
boolean False Select True to configure the IP layer
to enable packet forwarding.
Select False to disable packet
forwarding.
20 non-local-
source-routing
option non-
local-source-
routing false;
boolean False Select True to configure the IP layer
to forward datagrams with non-local
source routes.
Select False to disable forwarding of
the datagrams.
Option
Code
dhcpd.conf
Key-word
dhcpd.conf
example
Data type
Default
Value
Description
To Next Page
Loading...
