Configuring Access Guardian OmniAccess Stellar AP Integration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-75
7 Use the show mvrp configuration command to verify that MVRP is enabled for the switch. For
example:
-> show mvrp configuration
MVRP Enabled : no,
Maximum VLAN Limit : 256
8 Use the show system command and the show interfaces command to verify system name, system
location, and port alias information. For example:
-> show system
System:
Description: Alcatel-Lucent Enterprise OS6860E-P48 8.3.1.R02 GA Development,
February 10, 2017.,
Object ID: 1.3.6.1.4.1.6486.801.1.1.2.1.11.1.8,
Up Time: 11 days 3 hours 5 minutes and 49 seconds,
Contact: Lab Admin,
Name: BWIAPS01,
Location: BWI Airport hotel,
Services: 78,
Date & Time: THU JAN 22 2015 07:44:07 (UTC)
Flash Space:
Primary CMM:
Available (bytes): 1121243136,
Comments : None
-> show interfaces port 1/1/12 alias
Chas/
Slot/ Admin Link WTR WTS Alias
Port Status Status (sec) (msec)
--------+----------+---------+----------+----------+-----------------------
1/1/12 enable down 0 0 "BWI-AP01"
To Next Page
Loading...
