Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 51
Parameter Descriptions Chapter 2
Motor Rated Power Factor
Linear Number: P015
Default Value: 87.99%
Minimum Value: 0.00%
Maximum Value: 100.00%
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter is the motor rated power factor.
Number Of Motor Pole Pairs
Linear Number: P017
Default Value: 2
Minimum Value: 0
Maximum Value: 100
Access Level: R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter sets the number of motor pole pairs.
Encoder Resolution
Linear Number: P019
Default Value: 1024
Minimum Value: 0
Maximum Value: 4096
Access Level: R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter sets the resolution of the encoder.
VFD Rated Current
Linear Number: P085
Default Value: 40
Minimum Value: 0
Maximum Value: 5000
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter sets the drive rated current.

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English