Sheet # 680f – Leak programs parameters
Version 1.04a User guide ATEQ 6th series Page 8/9
3.2. PROGRAM DELETION OR PROGRAM NAME DELETION
This menu allows deleting a program or its name.
To access to the parameters menu, from the
cycle menu, press the
or
keys.
Pr 001
LEAK TEST
Then select the
menu
Select the program to delete by ising the
keys and then validate with
the
key.
2#4#/'6'45
Ź Copy-Paste
Pr:01 LEAK TEST
Pr:02 -----------------
Pr:03 -----------------
Pr:04 -----------------
Pr:05 -----------------
Pr:06 -----------------
Pr:07 -----------------
The program parameters are displayed, select
"TYPE" with the
keys and
validate with the
key.
2#4#/2T
TYPE : LEAK TEST
COUPL A : 0.0 s
FILL TIME : 1.0 s
STAB TIME : 4.0 s
TEST TIME : 2.0 s
DUMP TIME : 0.8 s
Press. UNIT: mbar
Ź Max FILL : 600.0
The delete menu appears, There are two
possibilities: delete the program name or
delete the whole program. Select what to
delete with the
keys and then
validate with
key.
2#4#/
2T6'566;2
Ź Delete name
Reset program
Caution! The program or program name deletion are instantaneous without prior
notice.
Note: if the "Program" deletion operation is done first, then the "Program name" deletion is
done too.
To Next Page
Loading...
Need help?
General
