AudioCodes Mediant 1000B - Page 607

Version 7.2 607 Mediant 1000B Gateway & E-SBC
User's Manual 27. Configuring Supplementary Services
Parameter Description
mber]

Validation of source (calling) number for Tel-to-IP calls
 Mapping between local and global (E.164) numbers between
Tel and IP sides respectively
Module
module
[ISDNSuppServ_Module]
Defines the device's module number to which the endpoint is
connected.
Port
port
[ISDNSuppServ_Port]
Defines the port number on the module to which the endpoint is
connected.
User ID
user-id
[ISDNSuppServ_UserId]
Defines the User ID for registering the endpoint to a third-party
softswitch for authentication and/or billing.
User Password
user-password
[ISDNSuppServ_UserPassword]
Defines the user password for registering the endpoint to a third-
party softswitch for authentication and/or billing.
Note: For security, the password is displayed as an asterisk (*).
CFB Phone Number
cfb-to_phone-number
[ISDNSuppServ_CFB2PhoneNu
mber]
Defines the phone number for BRI Call Forward Busy (CFB)
services. If the BRI extension is currently in use, the device
forwards the call to this number.
Note:
 The parameter is applicable only to BRI interfaces.
 To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
For more information on configuring local handling of BRI call
forwarding, see Local Handling of BRI Call Forwarding on page
584.
CFNR Phone Number
cfnr-to_phone-number
[ISDNSuppServ_CFNR2PhoneN
umber]
Defines the phone number for BRI Call Forward No Reply
(CFNR) services. If the BRI extension does not answer the call
within a user-defined timeout (see the 'No Reply Time' parameter
below), the device forwards the call to this number.
Note:
 The parameter is applicable only to BRI interfaces.
 To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
For more information on configuring local handling of BRI call
forwarding, see Local Handling of BRI Call Forwarding on page
584.
CFU Phone Number
cfu-to_phone-number
[ISDNSuppServ_CFU2PhoneNu
mber]
Defines the phone number for BRI Call Forward Unconditional
(CFU) services. The device always forwards the call to this
number.
Note:
 The parameter is applicable only to BRI interfaces.
 To enable BRI call forwarding services, see the
BRICallForwardHandling parameter.
For more information on configuring local handling of BRI call
forwarding, see Local Handling of BRI Call Forwarding on page
584.