AudioCodes Mediant 1000B - Page 711

Version 7.2 711 Mediant 1000B Gateway & E-SBC
User's Manual 34. Routing SBC
• IP Group for the second IP PBX ("Type" and "Port" tags are later used to identify
the IP PBX and assign it a local UDP port 6002 on the leg interfacing with the
proxy server):
General
Index
2
Name
PBX-2
Type
Server
SBC Advanced
Tags
Type=PBX;Port=6002
• IP Group for the third IP PBX ("Type" and "Port" tags are later used to identify the
IP PBX and assign it a local UDP port 6003 on the leg interfacing with the proxy
server):
General
Index
3
Name
PBX-3
Type
Server
SBC Advanced
Tags
Type=PBX;Port=6003
• IP Group for the proxy server ("Type" tag is later used to identify proxy server):
General
Index
4
Name
ITSP
Type
Server
SBC Advanced
Tags
Type=ITSP
3. Open the Call Setup Rules table (see Configuring Call Setup Rules on page 393), and
then configure the following Call Setup rules:
• Uses the value of the "Type" tag name, configured in the IP Group's 'Tags'
parameter, as the source tag:
General
Index
1
Rule Set ID
1
Action
Action Subject
srctags.Type
Action Type
Modify
Action Value
param.ipg.src.tags.Type