Page 2–24
DuRApulse GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
Chapter 2: Installation and Wiring
Wiring Terminal ConneCTor dimensions – main-CirCuiT Terminals
dimensions = mm
frame size a (gs4 model #s: 21p0, 22p0, 23p0, 25p0, 41p0, 42p0, 43p0, 45p0, 47p5)
NOTE: Crimp connectors are NOT required on A, B, and C frame drives.
NOTE: Heat shrink should comply with UL (600V, YDPU2).
Power Terminal Wiring Connectors: Heat Shrink Tubing:
frame size b (gs4 model #s: 27p5, 2010, 2015, 4010, 4015, 4020)
NOTE: Crimp connectors are NOT required on A, B, and C frame drives.
NOTE: Heat shrink should comply with UL (600V, YDPU2).
Power Terminal Wiring Connectors: Heat Shrink Tubing:
To Next Page
Loading...
