Automation Direct DURApulse GS4 - Page 65

Chapter 2: Installation and Wiring
Page 2–27
DuRApulse GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
main CirCuiT Crimp ConneCTor speCifiCaTions (ConTinued)
dimensions = mm
frame size f (gs4 model #s: 4175, 4200)
NOTE: Crimp connectors ARE required on D0, D, E, F, and G frame drives.
NOTE: Heat shrink should comply with UL (600V, YDPU2).
Power Terminal Wiring Connectors: Heat Shrink Tubing:
31MAX.
8.2MIN.
26.5MAX.
70MAX.
16
+0
-4
frame size g (gs4 model #s: 4250, 4300)
NOTE: Crimp connectors ARE required on D0, D, E, F, and G frame drives.
NOTE: Heat shrink should comply with UL (600V, YDPU2).
For Terminals: R/L11, R/L12, S/L21, S/L22, T/L31, T/L32:
Power Terminal Wiring Connectors Heat Shrink Tubing:
31MAX.
Ø8.2MIN.
Ø26.5MAX.
54MAX.
16
+0
-4
For Terminals: U/T1, V/T2, W/T3, +1/DC+, -/DC-
Power Terminal Wiring Connectors Heat Shrink Tubing:
42.0(MAX.)
12.2(MIN.)
21.0(MAX.)
70.0(MAX.)
42.0(MAX.)