89000109-002 xVue Touch Installation Manual
Rev 2 Page 7-25
© Honeywell International Inc. Do not copy without express permission of Honeywell.
For Use in Non-Certified Aircraft
• IFR Hi
• VFR Sectional
• FAA airport diagrams (has an option to only download new or changed diagrams)
(7) Press “Update Now” (top-right of the screen) to update the database(s) if any of the states are
shown in yellow or red, Figure 7-30.
(8) Follow Step 2through Step 10 to set up the connection between the KSD 100EXP and iPad/iPhone.
After the connection has been set up, FlyQ application detected window appears on the KSD 100EXP,
Figure 7-31.
(9) On the iPad/iPhone, check that the desired states have been updated
(10) Press “OK” on the KSD 100, Figure 7-31.
Figure 7-31 FlyQ Application Detected Window
NOTE
DIGITAL CHARTDATA (AIRPORTS, AIRSPACE, NAVAIDS, OBSTACLES, ETC.) IS
AUTOMATICALLY DOWNLOADED.
NOTE
IF DATABASES ARE UPDATED USING THE INDIVIDUAL STATE SELECTION CAPABILITY, THE
DATABASE EFFECTIVITY DATES DISPLAYED ON THE DATABASE ACKNOWLEDGE SCREEN
MAY DISPLAY “EXPIRED” BECAUSE THE XVUE TOUCH EFFECTIVITY DATE FUNCTION DOES
NOT ACCOUNT FOR INDIVIDUAL STATE EFFECTIVITY.
NOTE
WHEN UPDATING JUST SELECTED STATES, REST OF THE STATES WILL NOT BE AVAILABLE.
To Next Page
Loading...
