BENDIXKing XVUE TOUCH - Tools Required but Not Supplied; Table 3-14 Tools Required but Not Supplied

89000109-002 xVue Touch Installation Manual
Rev 2 Page 3-10
© Honeywell International Inc. Do not copy without express permission of Honeywell.
For Use in Non-Certified Aircraft
3.3.3 Tools Required but Not Supplied
The following tools are required for installation but not supplied:
1/4 inch Braid Commercially
Available
As Required
32 GB USB drive with Type-C form
factor or
32 GB USB drive and USB-C adapter
Commercially
Available
As Required
Table 3-14 Tools Required But Not Supplied
Part Number or Specification Description Notes
Commercially Available Screwdriver
Commercially Available Torque Wrench
Commercially Available Milliohm Meter & Multi Meter
Commercially Available Clamp-on In-Circuit Ammeter
KS5549 Kell-Strom Pro 360 Digital
Inclinometer
Equivalent inclinometer
with accuracy of ± 0.1
degrees
Commercially Available Pitot/static tester
Commercially Available NAV/ILS Signal Generator
Commercially Available Aircraft Power Unit
Commercially Available Ring/Terminal Crimper
Commercially Available Environmental Crimper GMT232/ M22520/37-01
Commercially Available Maintenance PC Loaded with the CMT
Commercially Available USB to Serial Converter/Adapter
D-sub 78 Pin Socket and Pin Connector Tools for the KSD 100 EXP Backshell Assembly Installation Kit
(89000120-002)
M81969/1-04 Green and White Metal Insert/Removal Tools
AFM8 Crimp Tool M22520/2-01
K42 Crimper Turret Head, Positioner M22520/2-09
D-sub 9 Pin Socket and Pin Connector Tools for the KCP 100EXP Control Panel Installation Kit
(89000126-004)
M81969/1-02 Red and White Metal Insert/Removal Tools
AFM8 Crimp Tool M22520/2-01
Table 3-13 Installation Materials Required but Not Supplied
Description PN or Specification Quantity Note