100 Programmer
Chapter 2 Programming with Help Function
Checking the program setting and setting attribute
Refer to "Checking the program setting and setting attribute" (page 109).
Editing the current data
The following options are available as editing functions.
Moving data of the needle positions after the current position in parallel by feeding
Moving data of the needle positions after the current position in parallel by sewing with
the specified pitch
Moving data of the needle positions after the current position in parallel
Copying repeatedly the previous data on the current and the following needle positions
Copying the previous data symmetrically to the Y axis on the current and the following
needle positions
Copying the previous data symmetrically to the X axis on the current and the following
needle positions
Copying the previous data symmetrically to a point on the current and the following needle
positions
Copying the previous data in the reverse direction on the current and the following needle
positions
Changing the stitch length or the number or lines for a multiple stitch
Adjust the needle position before editing.
Refer to "Checking the program setting and setting attribute" (page 109) for adjustment.
1. Select
and press .
To Next Page
Loading...
