Brother BAS-311F-0 - Deleting the Escape Point

Programmer 155
Chapter 3 Programming with Command Function
4. The needle point moves to B.
Saving
1. Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1. Press .
Deleting the escape point
The escape point is deleted. The example in the left is used
for explanation of deleting A.
Calling data
1. Specify the program number on the operation
panel and press the read/write switch to read
the data.
Moving to position A.
1. Press and press .
The work clamp moves to the escape point.