Brother BAS-311F-0 - Adding Sewing Point before the First Stitch

62 Programmer
Chapter 2 Programming with Help Function
Adding sewing point before the first stitch
A point is added before the current sewing point to change
the sewing start position.
The example in the left is used for explanation of changing
the sewing start position from 1 to 1'.
Calling data
1. Press .
The work clamp moves to the home position. The
programmer screen is displayed.
2. Select with and press .
3. Select
with and press .
4. Input the data number and press
.
5. Press
.
Moving to position 1
1. Select with and press .
2. Press
and press .
The work clamp moves to the sewing start
position.
3. Press .