Programmer 193
Chapter 3 Programming with Command Function
Deleting data
Deletes the data during creating and displaying.
Deleting a part of data
Command to be used
Deletes data after stitches.
If this command is used at the sewing start position, the sewing start
position is deleted and the current needle position becomes the sewing
start position.
Deletes data before stitches.
If this command is used at the sewing end position, the end code is deleted.
1. Move the needle to the desired position.
Refer to “Moving needle point” (page 123).
2. Input the command.
Input to delete data after the current needle position.
Input
to delete data before the current needle position.
Input the stitch count in
.
Deleting program data
1. Press .
An alarm sound is issued and input data is deleted.
To Next Page
Loading...
Need help?
General
