Brother BAS-311F-0 - Checking the Program Setting and Setting Attribute

Programmer 109
Chapter 2 Programming with Help Function
Checking the program setting and setting attribute
Checking the program setting and setting attribute
The following items are displayed.
End code
Current needle position/Total stitch count
Distance from the previous position in the X and Y axial directions
Stitch data type and availability of the option
output, low-speed sewing(*)
Displayed at points where stitch is set.
Feed data type and availability of the option
output, with/without thread.
Displayed at points where feed data is
set
Needle stop position of the split data (*)
Displayed at points where split data is
set.
Extended option output no. of the trigger data and
with/without machine stoppage (*) (BAS-300Series)
Displayed at points where trigger is
set.
Attribute of items marked with * are available for setting.
An example of stitch data is shown below.
1. Select or and press .
Stitch data type
Option output
present/absent
Slow conversion
End code
Current stitch count
Total stitch count
Distance from the previous
point in the direction of X
or Y axis
Selecting from the main menu
Selecting from the data programming menu