Brother BAS-311F-0 - Writing the Extended Option Output Data

Programmer 201
Chapter 4 Extended Option Output
Writing the extended option output data
Writes the extended option output data memorized in the programmer into a floppy disk.
The data is also registered into the machine.
Be sure to use a formatted 2HD floppy disk.
"Formatting a floppy disk" (Refer to page 220.)
One floppy disk can record the data of extended option output No. 1 - 16.
1. Select
and press .
2. Make sure that the floppy disk is set and press .
Data is written and the submenu appears.