Programmer 91
Chapter 2 Programming with Help Function
3. Select the third point and press .
If are selected
1. Input the zigzag stitch width, stitch length and the overlap stitch count, then press .
Values of 0 - 9 are available for input.
2. Move the needle with to select the second point and press .
Creating a zigzag stitch
The following three options are available for zigzag stitch.
Creating a zigzag stitch on the sewing path
Creating a zigzag stitch on the left side of the sewing path
Creating a zigzag stitch on the right side of the sewing path
One to 99 points are available for plotting.
1. Select
and press .
Press for selection.
Zigzag pitch
Stitch count for overlap sewing
Zigzag width
Remaining plot count
Distance from the previous point
in the direction of X or Y axis
To Next Page
Loading...
