36 Programmer
Chapter 2 Programming with Help Function
Saving
1. Select with and press .
2. Select
with and press .
3. Input the data number and press
.
4. Press
.
Ending program
1. Press .
Feed
After thread breaking, a feed is set for continuous sewing with
the work clamp in position.
The example in the left is used for explanation of
programming pattern 2 with a feed after pattern 1.
Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
2. Select with and press .
To Next Page
Loading...
