Programmer 97
Chapter 2 Programming with Help Function
Carrying out double stitch
The following six options are available for double stitch.
Creating double stitch data in the reverse direction to the left side of the sewing path
Creating double stitch data in the reverse direction to the right side of the sewing path
Creating double stitch data in the same direction to the left side of the sewing path
Creating double stitch data in the same direction to the right side of the sewing path
Offsetting double stitch data to the left side of the sewing path
Offsetting double stitch data to the right side of the sewing path
If sharp angles or fine curves are included in the pattern sheet, the desired double stitch may not
be achieved.
1. Select
and press .
2. Select the type of double stitch and press .
3. Input the stitch length and the double stitch width, then press .
4. Move the needle with , then press .
Press twice to change the direction of sewing.
Press for selection.
Double stitch width
Stitch length
Distance from the previous point
in the direction of X or Y axis
Remaining plot count
To Next Page
Loading...
Need help?
General
