Brother BAS-311F-0 - Creating Patterns with Commands

Programmer 123
Chapter 3 Programming with Command Function
Description of commands
Moving needle point
Proceeding by stitches
Returning by stitches
Proceeding to the end point
Returning to the first point
Proceeding by skipping stitches
Returning by skipping stitches
Skipping to the end point (not applicable at the home position)
Skipping to the first point
Returning the position to the home position.
Deleting data
Deleting all data.
Deleting data from stitches
Deleting data before
stitches
Ending programming
Normal end
Fixing the sewing speed at 1000 rpm or lower.
Carrying out no thread wiping.
Setting the sewing speed at 1000 rpm or lower without thread wiping.
Carrying out no thread trimming.
Fixing the sewing speed at 1500 rpm or lower.