Brother BAS-311F-0 User Manual

Programmer 191
Chapter 3 Programming with Command Function
Moving in parallel
Command to be used
Changing the movement data for the current needle position.
Moving data in parallel after the current needle position (using needle drop
data to the moved position)
1. Move the needle to the desired position.
Refer to “Moving needle point” (page 123).
2. Input or .
3. Determine the destination point with and press .

Brother BAS-311F-0 Specifications

General

Brand	Brother
Model	BAS-311F-0
Category	Sewing Machine
Language	English