Programmer 89
Chapter 2 Programming with Help Function
4. Select the third point and press .
Creating a semicircle
The following two options are available for creating a semicircle.
Creating a semicircle of the specified diameter in the clockwise direction
Creating a semicircle of the specified diameter in the counterclockwise direction
1. Select and press .
2. Select the method of creating a semicircle, then press .
3. Input the stitch length, then press .
4. Move the needle with and press .
Stitch length
Remaining plot count
Distance from the previous point
in the direction of X or Y axis
To Next Page
Loading...
